Super Shiny Metallic felt & Metallic Iron-On sheet
Sold per sheet 20cm x 25cm Order 2 pieces for a mini roll 20cm x 50cm (when stocks allow)
Our Metallic felt is approximately 1mm - 1.2mm thick, with a super shiny metallic topping. Backed onto our heirloom quality Merino wool blend felt in a coordinating colour.
DIY Metallic Iron-on Now you can add some shine to your own felt!
Easy cut and weed.
Superb wash durability
Can be dry cleaned, tumble dried and ironed inside out.
Suitable for Wool felt, Rayon, cotton, polyester, mixtures of polyester/cotton and polyester/acrylic or similar textiles.
Instructions for use: Set your iron to its highest setting. Place your choice of fabric on a hard surface. then iron-on Metallic on top, Place a cloth on top to protect the Transfer sheet. Press iron firmly for 15-20 seconds covering entire area. Peel off protective cover whilst its still hot/warm
Please note - All our fabrics and felts are cut by hand using a roller cutter. It is not always possible to be absolutely accurate (were only human) please be aware there could be a difference of +/- 10mm